Mark 96AA Series
Hybrid or Automated, Jorlon Diaphragm
Angle style or inline, automated or hybrid pressure reducing valves for purified water, clean utilities and media in the biopharmaceutical, pharmaceutical, food & beverage and consumer health & beauty industries.
- Media prep: AWFI (ambient WFI)
- Bioreactor/fermenter process input control: AWFI
- Separation input and out control: AWFI
- Purification input and output control: AWFI, Buffer
- Clean utilities: clean steam, USP PW, WFI, CIP, large volume CCA, CCG
- F & B and consumer H & B process: inputs, outputs, purified water and clean utilities
- Available with extended range I-P transducer or a SST gas regulator
- Fully automated operation when used with I/P. Outlet set point pressure, and operation at full open during Rinse/CIP/Rinse cycle is controlled by PLC or DCS menu
- Automated operation drastically reduces offset (droop) compared with spring loaded regulators
- MK95, air-loaded design significantly reduces size and weight
- Optimized diaphragm material, surface area and support system for unsurpassed performance and life
- Size: 3/4″, 1″, 1-1/2″, 2″, 3″ (DN20, DN25, DN40, DN50, DN80)
- End Connections: ASME, Tri-Clamp, ASME Butt Weld, ASME Tube Weld, DIN/ISO Tri-Clamp and Tube Weld
- Cv & Flow Characteristic: 1.5 – 23 Cv (1,3 – 19,8 Kv), model dependent
- Max Pressure/Temperature: model dependent
- Setpoint Range: 3 psi (0,2 bar) to 135 psi (9,3); dependent on size and construction
- Wetted Material: ASME SA479 316L (UNS 31603) is standard. EN 10272:2000 GR 1.4435, AL-6XN®, Hastelloy C-22 and others are optional
- Surface Finish: ASME BPE SF5, 20Ra (0,5µm) electropolish is standard, 8Ra (0,2µm) optional
- Stem Seal- Diaphragm: Jorlon FDA, USP Class VI
- Soft Seat Option: Selection is size and Cv dependent; Jorlon, PEEK, Teflon (all materials to FDA & USP Class VI)
Jorlon Facts and Warranty
The majority of Steriflow valves come with the Jorlon diaphragm and, of course, a lifetime diaphragm warranty.
Jorlon Diaphragm InfoGraphic
Save money, extend preventive maintenance diaphragm change-out times, and realize the benefits of a valve that outlasts most normal systems.
- CRN (Canadian Registration Number)
- PED Category 1 (Pressure Equipment Directive)
- SEP Declaration (Sound Engineering Practice)
- All products use FDA and USP Class VI approved soft goods and seals where possible. Consult each product data for details
Mark 96AA Series
3/4″ Mark 96AA Series
1″ Mark 96AA Series
1-1/2′ Mark 96AA Series
2″ Mark 96AA Series
3″ Mark 96AA Series
Mark 96AA Series DIN with Tri-Clamp Ends
DIN15 Mark 96AA Series with Tri-Clamp Ends
DIN20 Mark 96AA Series with Tri-Clamp Ends
DIN25 Mark 96AA Series with Tri-Clamp Ends
DIN40 Mark 96AA Series with Tri-Clamp Ends
DIN50 Mark 96AA Series with Tri-Clamp Ends
DIN80 Mark 96AA Series with Tri-Clamp Ends
Mark 96AA Series ISO with Tri-Clamp Ends
DIN15 Mark 96AA Series ISO with Tri-Clamp Ends
DIN20 Mark 96AA Series ISO with Tri-Clamp Ends
DIN25 Mark 96AA Series ISO with Tri-Clamp Ends
DIN40 Mark 96AA Series ISO with Tri-Clamp Ends
DIN50 Mark 96AA Series ISO with Tri-Clamp Ends
DIN80 Mark 96AA Series ISO with Tri-Clamp Ends
Your List
Email List
Get A Quote
Related Products
Mark 96 Series
Manual, Low to High Flow, Sanitary Pressure Regulator
Mark 96C Series
Manual, Low to High Flow, Jorlon Diapragm
Mark 96A Series
Hybrid or Automated, Jorlon Diaphragm
Quick Quote
Know what you need and want a quote quickly? We can help! Fill out this form and we will get back to you shortly.